Trade Trends of optic line ou

from Jan 2022 to Sept 2025
Shipments Imported: 0
As Buyer Trade Value (USD): $0
Shipments Exported: 11
As Supplier Trade Value (USD): $17.65 K

Import and Export shipments of "optic line ou"

As Supplier
Shipper NameHS CodeShipment Weight (kg)Product KeywordsShipment Date
841410121.4
PUMP. SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASES PUMPING AND VACUUM CREATION. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. THEY HAVE A TWO-STAGE CONFIGURATION WITHOUT VALVES AND ARE CHARACTERIZED BY A LOW NOISE LEVEL OF UP TO 66 dBA. THE SUCTION AND FEED PORTS ARE DIRECTED RADIALLY UPWARDS RELATIVELY TO THE AXIS OF ROTATION. The pump body is constructed using tin bronze, cast iron, or stainless steel materials. The impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of 1.4122 steel and is sealed with a mechanical seal. The drive unit consists of high-efficiency three-phase electric motors with surface cooling and protection against water and dust. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR INLET PRESSURE: UP TO 33 M SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASEOUS PUMPING AND CREATING A VACUUM IN THE SYSTEM. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. They feature a two-stage configuration without valves and are characterized by a low noise level of up to 66 dBA. The suction and discharge ports are directed radially upward relative to the axis of rotation. The pump body is constructed of tin bronze, cast iron, or stainless steel. The impeller can be made of corrosion-resistant steel or red bronze. THE SHAFT IS MADE OF 1.4122 STEEL AND IS SEALED WITH A MECHANICAL FACE SEAL. THE DRIVE UNIT CONSISTS OF HIGH-EFFICIENCY THREE-PHASE ELECTRIC MOTORS WITH SURFACE COOLING AND PROTECTION AGAINST WATER AND DUST PENETRATION. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR; INLET PRESSURE: UP TO 33 MBAR; WORKING FLUID TEMPERATURE: UP TO 80 °C; TEMPERATURE OF PUMPED GAS: UP TO 100 °C UP TO 200 °C DRY SATURATED); INSTALLATION: HORIZONTAL BLOCK ON A SUPPORT PLATE.
Jun 13, 2022
optic line ou
841410121.4
PUMP. SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASES PUMPING AND VACUUM CREATION. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. THEY HAVE A TWO-STAGE CONFIGURATION WITHOUT VALVES AND ARE CHARACTERIZED BY A LOW NOISE LEVEL OF UP TO 66 dBA. THE SUCTION AND FEED PORTS ARE DIRECTED RADIALLY UPWARDS RELATIVELY TO THE AXIS OF ROTATION. The pump body is constructed using tin bronze, cast iron, or stainless steel materials. The impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of 1.4122 steel and is sealed with a mechanical seal. The drive unit consists of high-efficiency three-phase electric motors with surface cooling and protection against water and dust. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR INLET PRESSURE: UP TO 33 M SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASEOUS PUMPING AND CREATING A VACUUM IN THE SYSTEM. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. They feature a two-stage configuration without valves and are characterized by a low noise level of up to 66 dBA. The suction and discharge ports are directed radially upward relative to the axis of rotation. The pump body is constructed of tin bronze, cast iron, or stainless steel. The impeller can be made of corrosion-resistant steel or red bronze. THE SHAFT IS MADE OF 1.4122 STEEL AND IS SEALED WITH A MECHANICAL FACE SEAL. THE DRIVE UNIT CONSISTS OF HIGH-EFFICIENCY THREE-PHASE ELECTRIC MOTORS WITH SURFACE COOLING AND PROTECTION AGAINST WATER AND DUST PENETRATION. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR; INLET PRESSURE: UP TO 33 MBAR; WORKING FLUID TEMPERATURE: UP TO 80 °C; TEMPERATURE OF PUMPED GAS: UP TO 100 °C UP TO 200 °C DRY SATURATED); INSTALLATION: HORIZONTAL BLOCK ON A SUPPORT PLATE.
Jun 13, 2022
optic line ou
841410121.4
PUMP. SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASES PUMPING AND VACUUM CREATION. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. THEY HAVE A TWO-STAGE CONFIGURATION WITHOUT VALVES AND ARE CHARACTERIZED BY A LOW NOISE LEVEL OF UP TO 66 dBA. THE SUCTION AND FEED PORTS ARE DIRECTED RADIALLY UPWARDS RELATIVELY TO THE AXIS OF ROTATION. The pump body is constructed using tin bronze, cast iron, or stainless steel materials. The impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of 1.4122 steel and is sealed with a mechanical seal. The drive unit consists of high-efficiency three-phase electric motors with surface cooling and protection against water and dust. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR INLET PRESSURE: UP TO 33 M SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASEOUS PUMPING AND CREATING A VACUUM IN THE SYSTEM. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. They feature a two-stage configuration without valves and are characterized by a low noise level of up to 66 dBA. The suction and discharge ports are directed radially upward relative to the axis of rotation. The pump body is constructed of tin bronze, cast iron, or stainless steel. The impeller can be made of corrosion-resistant steel or red bronze. THE SHAFT IS MADE OF 1.4122 STEEL AND IS SEALED WITH A MECHANICAL FACE SEAL. THE DRIVE UNIT CONSISTS OF HIGH-EFFICIENCY THREE-PHASE ELECTRIC MOTORS WITH SURFACE COOLING AND PROTECTION AGAINST WATER AND DUST PENETRATION. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR; INLET PRESSURE: UP TO 33 MBAR; WORKING FLUID TEMPERATURE: UP TO 80 °C; TEMPERATURE OF PUMPED GAS: UP TO 100 °C UP TO 200 °C DRY SATURATED); INSTALLATION: HORIZONTAL BLOCK ON A SUPPORT PLATE.
Jun 13, 2022
optic line ou
841410121.4
PUMP. SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASES PUMPING AND VACUUM CREATION. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. THEY HAVE A TWO-STAGE CONFIGURATION WITHOUT VALVES AND ARE CHARACTERIZED BY A LOW NOISE LEVEL OF UP TO 66 dBA. THE SUCTION AND FEED PORTS ARE DIRECTED RADIALLY UPWARDS RELATIVELY TO THE AXIS OF ROTATION. The pump body is constructed using tin bronze, cast iron, or stainless steel materials. The impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of 1.4122 steel and is sealed with a mechanical seal. The drive unit consists of high-efficiency three-phase electric motors with surface cooling and protection against water and dust. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR INLET PRESSURE: UP TO 33 M SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASEOUS PUMPING AND CREATING A VACUUM IN THE SYSTEM. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. They feature a two-stage configuration without valves and are characterized by a low noise level of up to 66 dBA. The suction and discharge ports are directed radially upward relative to the axis of rotation. The pump body is constructed of tin bronze, cast iron, or stainless steel. The impeller can be made of corrosion-resistant steel or red bronze. THE SHAFT IS MADE OF 1.4122 STEEL AND IS SEALED WITH A MECHANICAL FACE SEAL. THE DRIVE UNIT CONSISTS OF HIGH-EFFICIENCY THREE-PHASE ELECTRIC MOTORS WITH SURFACE COOLING AND PROTECTION AGAINST WATER AND DUST PENETRATION. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR; INLET PRESSURE: UP TO 33 MBAR; WORKING FLUID TEMPERATURE: UP TO 80 °C; TEMPERATURE OF PUMPED GAS: UP TO 100 °C UP TO 200 °C DRY SATURATED); INSTALLATION: HORIZONTAL BLOCK ON A SUPPORT PLATE.
Jun 13, 2022
optic line ou
841410121.4
PUMP. SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASES PUMPING AND VACUUM CREATION. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. THEY HAVE A TWO-STAGE CONFIGURATION WITHOUT VALVES AND ARE CHARACTERIZED BY A LOW NOISE LEVEL OF UP TO 66 dBA. THE SUCTION AND FEED PORTS ARE DIRECTED RADIALLY UPWARDS RELATIVELY TO THE AXIS OF ROTATION. The pump body is constructed using tin bronze, cast iron, or stainless steel materials. The impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of 1.4122 steel and is sealed with a mechanical seal. The drive unit consists of high-efficiency three-phase electric motors with surface cooling and protection against water and dust. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR INLET PRESSURE: UP TO 33 M SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS ARE USABLE IN A WIDE RANGE OF PROCESS OPERATIONS REQUIRING GASEOUS PUMPING AND CREATING A VACUUM IN THE SYSTEM. THEY ARE VERY ECONOMICAL AND RELIABLE IN OPERATION. They feature a two-stage configuration without valves and are characterized by a low noise level of up to 66 dBA. The suction and discharge ports are directed radially upward relative to the axis of rotation. The pump body is constructed of tin bronze, cast iron, or stainless steel. The impeller can be made of corrosion-resistant steel or red bronze. THE SHAFT IS MADE OF 1.4122 STEEL AND IS SEALED WITH A MECHANICAL FACE SEAL. THE DRIVE UNIT CONSISTS OF HIGH-EFFICIENCY THREE-PHASE ELECTRIC MOTORS WITH SURFACE COOLING AND PROTECTION AGAINST WATER AND DUST PENETRATION. TECHNICAL CHARACTERISTICS OF SPECK PUMPEN VZ SERIES LIQUID RING VACUUM PUMPS FLOW RATE: UP TO 186 M³HOUR; INLET PRESSURE: UP TO 33 MBAR; WORKING FLUID TEMPERATURE: UP TO 80 °C; TEMPERATURE OF PUMPED GAS: UP TO 100 °C UP TO 200 °C DRY SATURATED); INSTALLATION: HORIZONTAL BLOCK ON A SUPPORT PLATE.
Jun 13, 2022
Premium Content Locked

Trademo turns 3B+ shipment records and 15M+ company profiles into actionable data for trade prospecting. Subscribe to Trademo Intel to grow the pipeline.

Trading Partners of optic line ou

Top Companies "optic line ou" is exporting to (by Value USD)

Markets in which optic line ou trades

Top Countries "optic line ou" is exporting to (by Value USD)

Importing Country2022
country flagsrussia
13.5 K
country flagskazakhstan
4.15 K

Products/HS Codes traded by optic line ou

Top HS Codes Exported by "optic line ou"

USD 5.74 K | 18.18%

Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters. - Vacuum pumps

USD 4.94 K | 18.18%

Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles Electric motors and generators (excluding generating sets). -- Of an output exceeding 750 W but not exceeding 75 kW

USD 2.33 K | 9.09%

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading 90.14 or 90.15; stroboscopes. - Revolution counters, production counters, taximeters, mileometers, pedometers and the like

USD 2.07 K | 9.09%

Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps

USD 1.34 K | 9.09%

Articles of iron or steel Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment. - Of a capacity of 50 l or more

Intel
Identify in-market buyers, prioritize high-potential accounts, and accelerate pipeline growth.
Subscribe to Intel Now→

Similar Companies to optic line ou

Companies exporting similar HS Codes as of "optic line ou" in estonia

Other Buyers and Suppliers in estonia who deal in similar products like optic line ou