HS Code Lookup for Sub-Heading 391990 in Germany

- self-adhesive, round polishing discs of a kind used for the manufacture of semiconductor wafers

- - for certain aircraft

- - - Transparent self-adhesive poly(ethylene terephthalate) film, - free from impurities or defects, - with a pressure-sensitive acrylic adhesive and a protective layer on one side and an antistatic layer of the ionic organic compound choline on the other side, - whether or not with a printable dust-proof layer of a modified long-chain organic alkyl compound, - with a total thickness (excluding protective layer) of 54 μm or more but not more than 64 μm and - a width of more than 1 295 mm but not more than 1 305 mm

- - - Polyester film: - covered on one side with a heat-releasable acrylic adhesive which peels off at a temperature of 90 °C or more but not more than 200 °C and a polyester layer, and - on the other side either uncoated or coated with a pressure-sensitive acrylic adhesive or coated with a heat-releasable acrylic adhesive which peels off at a temperature of 90 °C or more but not more than 200 °C and a polyester layer

- - - Polyester, polyethylene or polypropylene film, coated on one or both sides with a pressure-sensitive acrylic and/or rubber adhesive, whether or not provided with a removable protective film, in rolls of a width of 45,7 cm or more but not more than 160 cm

- - - Films consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an abrasion-resistant acrylic and on the other side with a pressure-sensitive acrylic adhesive, a water-soluble methylcellulose layer and a protective cover of poly(ethylene terephthalate)

- - - Reflective composite film, - consisting of an epoxy acrylate layer with an embossed uniform pattern on one side, - provided with one or more plastic layers on both sides, - provided with an adhesive layer and a release film on one side

- - - Film made of poly(vinyl chloride), poly(ethylene terephthalate), polyethylene or another polyolefin - coated on one side with a UV-sensitive acrylic adhesive and a protective film - with a total thickness without protective film of 65 µm or more

- - - Reflective film - made of a polycarbonate or polyacrylic film with uniform embossing on one side, - coated on one or both sides with one or more layers of plastic or metallised, - also with an adhesive layer and a removable protective film on one side

- - - reflective sheeting, consisting of a polyurethane layer provided on one side with security markings against counterfeiting, alteration or substitution of data or copying, or with an official marking for the intended use, and embedded glass beads, and on the other side with an adhesive layer, covered on one or both sides with a removable protective film

- - - Transparent self-adhesive poly(ethylene) film, free from impurities or defects, coated on one side with pressure-sensitive acrylic adhesive, with a density of 60 μm or more but not more than 70 μm and a width of more than 1 245 mm but not more than 1 255 mm

- - - Reflective composite film on rolls, with a width of more than 20 cm and an embossed regular pattern, consisting of a poly(vinyl chloride) film coated on one side with - a polyurethane layer containing glass microspheres, - a poly(ethylene-vinyl acetate) layer, - an adhesive layer and - a protective film

- - - Polyethylene or polycarbonate films, cut to ready-to-use shapes, - partially printed on one side, part of the print either providing information on the meaning of the LEDs visible through the unprinted areas or identifying the points that must be touched to control the system, - partially provided with an adhesive layer on the other side, - provided with a removable protective film on both sides, - with dimensions not exceeding 14 cm x 2.5 cm for use in the manufacture of pushbutton switches for mechatronic furniture systems

- - - Adhesive film consisting of a base layer of ethylene-vinyl acetate copolymer (EVA) with a thickness of 70μm or more and an acrylic adhesive layer with a thickness of 5μm or more, for use in grinding and/or cutting silicon wafers

- - - reinforced polyethylene foam tape, coated on both sides with a pressure-sensitive micro-channeled acrylic adhesive and on one side with a protective cover, with an application thickness of 0,38 mm or more but not more than 1,53 mm

- - - Polytetrafluoroethylene film, -with a thickness of 50 μm or more, -with a width of 6.30 mm or more but not more than 740 mm, -with an elongation at break of not more than 200 % and -coated on one side with a layer of a pressure-sensitive silicone adhesive not more than 50 μm thick

- - - reflective composite film consisting of a poly(methyl methacrylate) film on which a regular pattern is embossed on one side, a film containing glass microspheres, an adhesive layer and a removable protective film

- - - Self-adhesive reflective composite film, whether or not in segmented pieces, - whether or not bearing a watermark, - whether or not with a layer of transfer film, coated on one side with an adhesive; the reflective film consists of: - a layer of acrylic or vinyl polymer, - a layer of poly(methyl methacrylate) or polycarbonate with microprisms, - a metallised layer, - an adhesive layer and - a removable protective film - whether or not with an additional polyester layer

- - - biaxially oriented film made of poly(methyl methacrylate), with a thickness of 50 µm or more but not more than 90 µm, provided on one side with an adhesive layer and a removable protective film

- - - Acrylic foam tapes, with a heat-activated adhesive or pressure-sensitive acrylic adhesive on one side and a pressure-sensitive acrylic adhesive and a removable protective film on the other side, with a peel adhesion force at an angle of 90 ° of more than 25 N/cm (according to ASTM D 3330)

- - - Polyvinyl chloride film, provided on one side with - a polymer layer, - an adhesive layer, - a removable release layer, embossed on one side with flattened balls, also provided on the other side with an adhesive layer and a metallised polymer layer

- - - Black polyvinyl chloride film -with a gloss level of more than 25 degrees (according to ASTM D 2457), -whether or not coated on one side with a protective film of polyethylene terephthalate and on the other side with a microstructured pressure-sensitive acrylic adhesive and a removable protective film for use in the manufacture of die-cut films for interior and exterior surfaces of motor vehicles

- - - Self-adhesive film with a thickness of 40 µm or more but not more than 475 µm, consisting of one or more layers of transparent metallised or coloured poly(ethylene terephthalate) coated on one side with a scratch-resistant coating and on the other side with a pressure-sensitive adhesive and a release liner

- - - self-adhesive polishing discs made of microporous polyurethane, also provided with a backing

- - - self-adhesive reflective film, consisting of several layers including: - an acrylic resin copolymer, - polyurethane, - a metallised layer, on one side provided with laser marking to protect against forgery, alteration or substitution of data or against copying, or with an official marking for a specific use, - glass microspheres and - an adhesive layer with a removable protective film on one or both sides

- - - Reflective sheeting consisting of - a polyurethane layer, - a layer containing glass microspheres, - a metallised aluminium layer and - an adhesive layer, covered on one or both sides with a protective film, - whether or not with a polyvinyl chloride layer - a layer which may contain security markings against counterfeiting, alteration or substitution of data or copying or an official marking for the intended use

- - - Reflective or diffusion films, in rolls: -for protection against ultraviolet or infrared heat radiation, for attachment to windows, or -for uniform light transmission and distribution, for LCD modules

- - - other