HS Code Lookup for Sub-Heading 382499 in Germany

- - - - - - Preparation containing 92% or more but not more than 96,5% by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol, whether or not containing derivatives of carboxylic acid and an alkyl sulphate

- - - - - - Mixture of acetates of 3-butene-1,2-diol containing 65% or more by weight of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)

- - - - - - Reaction mass of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)

- - - - - - Preparation containing 47 % or more by weight of 1,3:2,4-bis-O-(benzylidene)-D-glucitol

- - - - - - Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic solvents

- - - - - - Formaldehyde, oligoxadmeric reaction product with aniline (technical MDA) (CAS RN 25214-70-4)

- - - - - - Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene

- - - - - - Preparation containing by weight 65 % or more but not more than 95 % of -isopropylated triaryl phosphate (CAS RN 68937-41-7) and 5 % or more but not more than 35 % of -triphenyl phosphate (CAS RN 115-86-6)

- - - - - - Preparation consisting essentially of γ-butyrolactone and quaternary ammonium salts for the manufacture of electrolytic capacitors

- - - - - - Preparation based on 2,5,8,11-tetramethyl-6-dodecin-5,8-diol ethoxylate (CAS RN 169117-72-0)

- - - - - - Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol borate

- - - - - - Electrolyte containing -5% or more but not more than 20% of lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9), -60% or more but not more than 90% of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0), -0.5% or more but not more than 20% of 1,3,2-dioxathiolane-2,2-dioxide (CAS RN 1072-53-3) for use in the manufacture of automotive batteries

- - - - - - Preparation consisting essentially of ethylene glycol and: - either diethylene glycol, dodecanedioic acid and ammonia, - or N,N-dimethylformamide, - or γ-butyrolactone, - or silicon oxide, - or ammonium hydrogen azelate, - or ammonium hydrogen azelate and silicon oxide, - or dodecanedioic acid, ammonia and silicon oxide, for the manufacture of electrolytic capacitors

- - - - - - Poly(tetramethylene glycol)bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomers (CAS RN 813452-37-8)

- - - - - - Additives for paints and coatings containing - a mixture of phosphoric acid esters obtained by the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl)phenol and styrene-allyl alcohol copolymers (CAS RN 84605-27-6) and - an isobutyl alcohol content of 30 % or more but not more than 35 %

- - - - - - Poly(tetramethylene glycol)bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomers

- - - - - - Poly(ethylene glycol)bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomers

- - - - - - Potassium tert-butoxide (CAS RN 865-47-4), dissolved in tetrahydrofuran

- - - - - - 3',4',5'-trifluorobiphenyl-2-amine, in the form of a solution in toluene, containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine

- - - - - - Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofuran (CAS RN 109-99-9), containing 6 % or more by weight of 9-borabicyclo[3.3.1]nonane

- - - - - - Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate

- - - - - - Mixture of primary tert-alkylamines

- - - - - - - for use as fuel

- - - - - - - for other uses

- - - - - - Preparation containing by weight - 20% (±1%) of (3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl)tribenzene (CAS RN 1404190-37-9) dissolved in - 10% (±5%) of 2-sec-butylphenol (CAS RN 89-72-5) - 64% (±7%) of solvent naphtha, heavy, aromatic (petroleum) (CAS RN 64742-94-5) and - 6% (±1,0%) of naphthalene (CAS RN 91-20-3)

- - - - - - Preparation containing by weight - 80 % or more but not more than 92 % of bisphenol A bis(diphenyl phosphate) (CAS RN 5945-33-5), - 7 % or more but not more than 20 % of oligomers of bisphenol A bis(diphenyl phosphate) and - not more than 1 % of triphenyl phosphate (CAS RN 115-86-6)

- - - - - - Mixture of 80 % (± 10 %) 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) 1-({[2-(2-aminobutoxy)ethoxy]methyl}propoxy)but-2-ylamine

- - - - - - Mixture containing by weight -49% or more but not more than 51% of ethylene carbonate (CAS RN 96-49-1) and -49% or more but not more than 51% of 1,3-propane sultone (CAS RN 1120-71-4)

- - - - - - N-(2-Phenylethyl)-1,3-benzoldimethanamin -Derivate (CAS RN 404362-22-7)

- - - - - - Tri-C8-10-alkyl-amines (CAS RN 68814-95-9) with a purity of 95 % or more

- - - - - - Reaction mass containing by weight: -22,4 % or more but not more than 26,4 % of 3-methylphenyldiphenyl phosphate (CAS RN 69500-28-3); -17,3 % or more but not more than 21,3 % of 4-methylphenyldiphenyl phosphate (CAS RN 78-31-9); -5 % or more but not more than 9 % of bis(3-methylphenyl)phenyl phosphate (CAS RN 34909-68-7); -8,9 % or more but not more than 12,9 % of 3-methylphenyl-4-methylphenylphenyl phosphate (CAS RN 222165-66-4); -Triphenyl phosphate (CAS RN 115-86-6) of 26.9% or more but not more than 30.9%

- - - - - - Mixture containing by weight not more than 75% of: -tetrabutyltin (CAS RN 1461-25-2); -tributyltin chloride (CAS RN 1461-22-9) by weight not more than 20%; -dibutyltin dichloride (CAS RN 683-18-1) by weight not more than 4%; for use in the manufacture of butyltin compounds for glass manufacture and tributyltin chloride as a catalyst in the pharmaceutical industry

- - - - - - Preparation containing by weight - 74 % or more but not more than 90 % of (S)-α-hydroxy-3-phenoxy-benzene acetonitrile (CAS RN 61826-76-4) and - 10 % or more but not more than 26 % of toluene (CAS RN 108-88-3)

- - - - - - Preparation containing - 55% or more but not more than 78% dimethyl glutarate (CAS RN 1119-40-0) - 10% or more but not more than 30% dimethyl adipate (CAS RN 627-93-0) and - not more than 35% dimethyl succinate (CAS RN 106-65-0)

- - - - - - Mixture containing: -tributyltin chloride (CAS No 1461-22-9) with a purity of 80 % by weight or more; -tetrabutyltin (CAS RN 1461-25-2) of not more than 5 % by weight; -dibutyltin dichloride (CAS RN 683-18-1) of not more than 6 % by weight; -o-xylene (CAS RN 95-47-6) of not more than 11 % by weight; for use in the manufacture of tributyltin chloride as a catalyst in the pharmaceutical industry

- - - - - - Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyltriphenyl 1,3-phenylenebis(phosphate) and tetraphenyl 1,3-phenylenebis(phosphate)

- - - - - - Solution of tert-butylchlorodimethylsilane (CAS RN 18162-48-6) in toluene

- - - - - - 1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity of 70 % or more but not more than 90 %

- - - - - - Preparation consisting of 83% or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing 7% or more by weight of tricyclopentadiene, and: - either an aluminium alkyl compound, - or an organic tungsten complex compound, - or an organic molybdenum complex compound

- - - - - - Tall oil fatty amides, N,N-dimethyl- (CAS RN 68308-74-7) with a purity of 99 % or more

- - - - - - 2,4,7,9-Tetramethyldec-5-yn-4,7-diol, hydroxyethyliert (CAS RN 9014-85-1)

- - - - - - Mixture of tertiary alkyldimethylamines containing by weight: — 60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5) and — 20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

- - - - - - 1,2-Benzenedicarboxylic acid, di-C6-10-alkyl esters (CAS RN 68515-51-5)

- - - - - - 1,2-Benzenedicarboxylic acid, mixed decyl, hexyl and octyl diesters with ≥ 0.3% dihexyl phthalate (CAS RN 68648-93-1)

- - - - - - Solution consisting of: -50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and -50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)

- - - - - - Solution containing not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), containing organic carbonates as additives

- - - - - - ({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) containing 45% or more by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5)

- - - - - - Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of carboxylate

- - - - - - Goods containing more than 35 % by weight of epoxy resins, also known as epoxy resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups based on epichlorohydrin (hereinafter referred to as ‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), of any category, purity, molecular weight or structure, whether or not containing modifiers, hardeners or additives, provided that the hardeners have not undergone a chemical reaction which would have hardened the epoxy resin or transformed it into another product no longer containing epoxy groups

- - - - - - Monosodium glutamate in mixtures or solutions containing 50 % or more by weight of monosodium glutamate on the dry matter

- - - - - - other

- - - - - - Goods containing more than 35 % by weight of epoxy resins, also known as epoxy resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups based on epichlorohydrin (hereinafter referred to as ‘ECH’) and an aliphatic or aromatic alcoholic component (such as BPA), of any category, purity, molecular weight or structure, whether or not containing modifiers, hardeners or additives, provided that the hardeners have not undergone a chemical reaction which would have hardened the epoxy resin or transformed it into another product no longer containing epoxy groups

- - - - - - Preparation containing hexabromocyclododecane (CAS 25637-99-4 or 134237-52-8)

- - - - - - Mixture in powder form containing - 85 % or more by weight of zinc diacrylate (CAS RN 14643-87-9), - not more than 5 % by weight of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7) and - not more than 10 % by weight of zinc stearate (CAS RN 557-05-1)

- - - - - - Preparation containing by weight: -60% or more but not more than 70% of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1), -30% or more but not more than 40% of zinc distearate (CAS RN 557-05-1), -1% or more but not more than 5% of CI Pigment Blue 29 (CAS RN 57455-37-5), and -1% or more but not more than 5% of CI Pigment Violet 15 (CAS RN 12769-96-9)

- - - - - - Paraffin, at least 70 % chlorinated (CAS RN 63449-39-8)

- - - - - - Preparation containing by weight 60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)

- - - - - - Anticorrosive preparations of salts of dinonylnaphthalenesulfonic acid: - on a carrier of mineral wax, whether or not chemically modified, or - dissolved in organic solvents

- - - - - - Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulfone, diphenyltolyl-2,4-dicarbamate and 1-[4-(4-aminobenzenesulfonyl)phenyl]-3-(3-phenoxycarbonylamino-tolyl)urea

- - - - - - Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight: - not more than 20% disodium sulfate and - not more than 10% sodium chloride

- - - - - - Non-halogenated flame retardant containing by weight 50 % or more but not more than 65 % of -piperazine pyrophosphate (CAS RN 66034-17-1), 35 % or more but not more than 45 % of -phosphoric acid ester derivative and not more than 6 % of -zinc oxide (CAS RN 1314-13-2)

- - - - - - Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5), with a purity of 85 % or more

- - - - - - Zinc dimethacrylate (CAS RN 13189-00-9) containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), in the form of powder

- - - - - - Mixture of phytosterols containing by weight - 35 % or more but not more than 88 % of sitosterol - 20 % or more but not more than 63 % of campesterol - 14 % or more but not more than 38 % of stigmasterol - not more than 13 % of brassicasterol - not more than 10 % of other stanols - not more than 10 % of other sterols

- - - - - - Disodium 7,7'-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulfonate) (CAS RN 20324-87-2) with a purity of 80 % or more

- - - - - - Mixture of phytosterols, not in the form of powder, containing by weight: - 75 % or more of sterols - not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

- - - - - - Reaktionsmasse von 1,1'-(Isopropyliden)-bis[3,5-dibrom-4-(2,3-dibrom-2-methylpropoxy)benzol] (CAS RN 97416-84-7) und 1,3-Dibrom-2-(2,3-dibrom-2-methylpropoxy)-5-{2-[3,5-dibrom-4-(2,3,3-tribrom-2-methylpropoxy)phenyl]propan-2-yl}benzol

- - - - - - Mixture of plant sterols, in powder form, containing by weight: - 75 % or more of sterols - not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

- - - - - - oligomeric reaction product consisting of bis(4-hydroxyphenyl)sulfone and 1,1'-oxybis(2-chloroethane)

- - - - - - 1,3-Propanediamine, N1,N1'-1,2-ethanediylbis-, reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine (CAS RN 191680-81-6)

- - - - - - Mixture of phytosterols, in the form of flakes and pellets, containing by weight 80 % or more of sterols and not more than 4 % of stanols

- - - - - - Particles of silicon dioxide on which organic compounds are covalently bound, for use in the manufacture of high performance liquid chromatography (HPLC) columns and sample preparation cartridges

- - - - - - Mixture of phytosterols containing at least the following constituents - 60% or more but not more than 80% sitosterols, - not more than 15% campesterols, - not more than 5% stigmasterols, - not more than 15% betasitostanols

- - - - - - Monosodium glutamate in mixtures or solutions containing 50 % or more by weight of monosodium glutamate on the dry matter

- - - - - - other

- - - - - Rare earth concentrate containing by weight: - 20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3), - 2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8), - 10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), and - not more than 65 % of zirconium oxide (CAS RN 1314-23-4), including naturally occurring hafnium oxide

- - - - - calcined bauxite (refractory)

- - - - - structured silicoaluminophosphate

- - - - - Anticorrosive preparations of salts of dinonylnaphthalenesulfonic acid: - on a carrier of mineral wax, whether or not chemically modified, or - dissolved in organic solvents

- - - - - Silica gel functionalised with 2-(ethylthio)ethanethiol with a purity of 98 % or more

- - - - - Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with -a grain size of less than 10 µm, -a purity of more than 98% by weight

- - - - - Granules of manganese-zinc ferrite containing by weight: - 52 % or more but not more than 76 % of iron(III) oxide, - 13 % or more but not more than 42 % of manganese(II) oxide, and - 2 % or more but not more than 22 % of zinc oxide

- - - - - Mixture of metal oxides, in powder form, containing: - 5 % or more by weight of either barium, neodymium or magnesium and 15 % or more by weight of titanium, - or 30 % or more by weight of lead and 5 % or more by weight of niobium, for use in the manufacture of dielectric films or for use as a dielectric in the manufacture of multilayer ceramic capacitors

- - - - - Zirconium oxide (ZrO2), stabilised with calcium oxide (CAS RN 68937-53-1) containing 92 % or more but not more than 97 % of zirconium oxide

- - - - - Nickel hydroxide doped with 12 % or more but not more than 18 % of zinc hydroxide and cobalt hydroxide, of a kind used for the manufacture of positive electrodes for storage batteries

- - - - - Rare earth concentrate containing by weight 60% or more but not more than 95% of rare earth oxides and not more than 1% each of zirconium oxide, aluminium oxide or iron oxide and with a loss on ignition of 5% or more

- - - - - powdered carrier consisting of: - ferrite (iron oxide) (CAS RN 1309-37-1) - manganese oxide (CAS RN 1344-43-0) - magnesium oxide (CAS RN 1309-48-4) - styrene acrylate copolymer to be added to powdered toner in the manufacture of ink or toner-filled bottles or cartridges for fax machines, printers or photocopiers

- - - - - Particles of silicon dioxide on which organic compounds are covalently bound, for use in the manufacture of high performance liquid chromatography (HPLC) columns and sample preparation cartridges

- - - - - Fused magnesia containing 15 % or more by weight of dichromium trioxide

- - - - - Viscous preparation, consisting essentially of -more than 5% but not more than 15% poly(vinyl alcohol) (CAS RN 9002-89-5), -more than 10% but not more than 20% 1-methoxy-2-propanol (CAS RN 107-98-5), -water, for use as a protective coating for wafers during the cutting process in the manufacture of semiconductors

- - - - - Aluminium sodium silicate, in the form of beads with a diameter of: - either 1,6mm or more but not more than 3,4mm, - or 4mm or more but not more than 6mm

- - - - - Lithium nickel dioxide (CAS RN 12325-84-7), containing by weight: -less than 5% lithium hydroxide (CAS RN 1310-65-2), -less than 5% lithium carbonate (CAS RN 554-13-2), -less than 15% nickel oxide (CAS RN 11099-02-8)

- - - - - Reaction product containing by weight: - 1 % or more but not more than 40 % of molybdenum oxide, - 10 % or more but not more than 50 % of nickel oxide, - 30 % or more but not more than 70 % of tungsten oxide

- - - - - Mixture with a non-stoichiometric composition: - with a crystalline structure, - consisting of fused magnesia-alumina spinel and admixtures of silicate phases and aluminates, of which at least 75 % by weight is represented by fractions with a grain size of 1-3 mm and at most 25 % by weight is represented by fractions with a grain size of 0-1 mm

- - - - - Mixture consisting of - 64% by weight or more but not more than 74% by weight of amorphous silicon dioxide (CAS RN 7631-86-9), - 25% by weight or more but not more than 35% by weight of butanone (CAS RN 78-93-3), and - not more than 1% by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

- - - - - cubic boron nitride (CAS RN 10043-11-5), coated with nickel and/or nickel phosphide (CAS RN 12035-64-2)

- - - - - Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight - 0,1 % or more but not more than 1 % of platinum and - 0,5 % or more but not more than 5 % of ethyl aluminium dichloride (CAS RN 563-43-9)

- - - - - Monosodium glutamate in mixtures or solutions containing 50 % or more by weight of monosodium glutamate on the dry matter

- - - - - Mixture in the form of pellets containing by weight: - 49 % or more but not more than 50 % of bis(3-triethoxysilylpropyl)polysulphides (CAS RN 211519-85-6) and - 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), with a sieve passing rate of 75 % or more through a mesh size of 0,60 mm but not more than 10 % through a mesh size of 0,25 mm (according to the ASTM D1511 method)

- - - - - other