HS Code Lookup for Sub-Heading 382499 in Guernsey

Preparations containing not less than 92% but not more than 96.5% by weight of 1.3:2.4-bis-o-(4-methylbenzylidene)-d-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate

Mixture of acetates of 3-butene-1.2-diol with a content by weight of 65% or more of 3-butene-1.2-diol diacetate (cas rn 18085-02-4)

Reaction products of phosphoryl trichloride and 2-methyloxirane (cas rn 1244733-77-4)

Preparations containing not less than 47% by weight of 1.3:2.4-bis-o-benzylidene-d-glucitol

Solution of 2-chloro-5-(chloromethyl)-pyridine (cas rn 70258-18-3) in organic diluent

Formaldehyde, oligomeric reaction products with aniline (cas rn 25214-70-4)

Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (cas rn 25379-26-4) in toluene

Preparation containing by weight: -65% or more, but not more than 95% of isopropylated triaryl phosphate (cas rn 68937-41-7) and -5% or more, but not more than 35% of triphenyl phosphate (cas rn 115-86-6)

Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors

Preparation based on 2.5,8.11-tetramethyl-6-dodecyn-5.8-diol ethoxylate (cas rn 169117-72-0)

Mixture containing by weight 40% or more but not more than 50% of 2-hydroxyethyl methacrylate and 40% or more but not more than 50% of glycerol ester of boric acid

Electrolyte containing: -5% or more but not more than 20% lithium hexafluorophosphate (cas rn 21324-40-3) or lithium tetrafluoroborate (cas rn 14283-07-9), -60% or more but not more than 90% of a mixture of ethylene carbonate (cas rn 96-49-1), dimethyl carbonate (cas rn 616-38-6 ) and/or ethyl methyl carbonate (cas rn 623-53-0), -0.5% or more but not more than 20% 1.3,2-dioxathiolane 2.2-dioxide (cas rn 1072-53-3) for use in the manufacture of motor vehicle batteries

Preparations consisting predominantly of ethylene glycol and: - either diethylene glycol, dodecandioic acid and ammonia water, - or n,n-dimethylformamide, - or γ-butyrolactone, - or silicon oxide, - or ammonium hydrogen azelate, - or ammonium hydrogen azelate and silicon oxide, - or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors

Poly(tetramethylene glycol) bis[(9-oxo-9h-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (cas rn 813452-37-8)

Additives for paints and coatings, containing: - a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1.1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (cas rn 84605-27-6), and - 30% or more but not more than 35% by weight of isobutyl alcohol

Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units

Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units

Potassium tert-butanolate (cas rn 865-47-4) in the form of a solution in tetrahydrofuran

3',4',5'-trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80% or more but not more than 90% of 3',4',5'-trifluorobiphenyl-2-amine

Solution of 9-borabicyclo[3.3.1]nonane (cas rn 280-64-8) in tetrahydrofurane (cas rn 109-99-9), containing by weight 6% or more 9-borabicyclo[3.3.1]nonane

Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate

Mixture of primary tert-alkylamines

For use as fuel

For other uses

Preparation containing by weight: - 20% (±1%) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) tribenzene (cas rn 1404190-37-9), dissolved in: - 10% (± 5%) 2-sec-butylphenol (cas rn 89-72-5) - 64%( ±7%) solvent naphtha (petroleum), heavy aromatic (cas rn 64742-94-5) and - 6% (± 1.0%) naphthalene (cas rn 91-20-3)

Preparation containing by weight: - 80% or more but not more than 92% of bisphenol-a bis(diphenyl phosphate) (cas rn 5945-33-5) - 7% or more but not more than 20% oligomers of bisphenol-a bis(diphenyl phosphate) and - not more than 1% triphenyl phosphate (cas rn 115-86-6)

Mixture of 80% (± 10%) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20% (± 10%) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

Mixture containing by weight: -49% or more but not more than 51% of ethylene carbonate (cas rn 96-49-1), and -49% or more but not more than 51% of 1.3-propanesultone (cas rn 1120-71-4)

N-(2-phenylethyl)-1.3-benzenedimethanamine derivatives (cas rn 404362-22-7)

Tri-c8-10-alkyl amines (cas rn 68814-95-9) with a purity by weight of 95% or more

Reaction mass containing by weight: -22.4% or more, but not more than 26.4% of 3-methylphenyl diphenyl phosphate (cas rn 69500-28-3); -17.3% or more, but not more than 21.3% of 4-methylphenyl diphenyl phosphate (cas rn 78-31-9); -5% or more, but not more than 9% of bis(3-methylphenyl) phenyl phosphate (cas rn 34909-68-7); -8.9% or more, but not more than 12.9% of 3-methylphenyl 4-methylphenyl phenyl phosphate (cas rn 222165-66-4); -26.9% or more, but not more than 30.9% of triphenyl phosphate (cas rn 115-86-6)

Mixture, containing by weight: -not more than 75% of tetrabutyltin (cas rn 1461-25-2), -not more than 20% of tributyltin chloride (cas rn 1461-22-9), -not more than 4% of dibutyltin dichloride (cas rn 683-18-1), for use in the production of butyltin compounds used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry

Preparation containing: - 74% or more but not more than 90% by weight of (s)-α-hydroxy-3-phenoxy-benzeneacetonitrile (cas rn 61826-76-4) and - 10% or more but not more than 26% by weight of toluene (cas rn 108-88-3)

Preparation containing by weight: - 55% or more but not more than 78% of dimethyl gluterate (cas rn 1119-40-0), - 10% or more but not more than 30% of dimethyl adipate (cas rn 627-93-0), and - not more than 35% of dimethyl succinate (cas rn 106-65-0)

Mixture, containing by weight: -tributyltin chloride (cas rn 1461-22-9) with a purity by weight of 80% or more, -not more than 5% tetrabutyltin (cas rn 1461-25-2), -not more than 6% dibutyltin dichloride (cas rn 683-18-1), -not more than 11% o-xylene (cas rn 95-47-6), for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry

Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyl triphenyl 1.3-phenylene bis(phosphate) and tetraphenyl 1.3-phenylene bis(phosphate)

T-butylchloride dimethylsilane (cas rn 18162-48-6) solution in toluene

1-(cedr-8-en-9-yl)ethanone (cas rn 32388-55-9) with a purity by weight of 70% or more, but not more than 90%

Preparation consisting by weight of 83% or more of 3a,4.7,7a-tetrahydro-4.7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7% or more of tricyclopentadiene, and: - either an aluminium-alkyl compound, - or an organic complex of tungsten - or an organic complex of molybdenum

Tall oil n,n-dimethyl fatty amides (cas rn 68308-74-7) with a purity by weight of 99% or more

2.4,7.9-tetramethyldec-5-yne-4.7-diol, hydroxyethylated (cas rn 9014-85-1)

Mixture of tertiary alkyldimethyl amines containing by weight: - 60% or more but not more than 80% of dodecyldimethylamine (cas rn 112-18-5), and - 20% or more but not more than 30% of dimethyl(tetradecyl)amine (cas rn 112-75-4)

1.2-benzenedicarboxylic acid, di-c6-10-alkyl esters (cas rn 68515-51-5)

1.2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0.3% of dihexyl phthalate (cas rn 68648-93-1)

Solution consisting of: - 50 (± 2) % by weight sodium mentholate (cas rn 19321-38-1), and - 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (cas rn 64742-89-8)

Solution of not more than 15% by weight of lithium hexafluorophosphate (cas rn 21324-40-3) in a mixture of ethylene carbonate (cas rn 96-49-1), dimethyl carbonate (cas rn 616-38-6) and ethyl methyl carbonate (cas rn 623-53-0), contains organic carbonate derivatives as additives

({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (cas rn 895525-72-1) with a content of at least 45% by weight dissolved in n,n-dimethylacetamide (cas rn 127-19-5)

Solution of methyl cis-1-{[(2.5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (cas rn 203313-47-7) in n,n-dimethylacetamide (cas rn 127-19-5), containing by weight 25% or more but not more than 45% of the carboxylate

Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups

Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate

Other

Products containing more than 35% by weight of epoxy resins, also known as epoxide resins or polyepoxides, which are polymers or prepolymers containing reactive epoxy groups, based on epichlorohydrin (‘ech’) and an aliphatic or aromatic alcoholic component (such as bpa), having all types of grade, purity, molecule weight or molecular structure, whether or not containing modifiers, curing agents, or additives, so long as the curing agents have not chemically reacted so as to cure the epoxy resin or convert it into a different product no longer containing epoxy groups

Preparation containing hexabromocyclododecane (cas 25637-99-4 or 134237-52-8)

Powder mixture containing by weight: - 85% or more of zinc diacrylate (cas rn 14643-87-9), - not more than 5% of 2.6-di-tert-butyl-alpha-dimethylamino-p-cresol (cas rn 88-27-7), and - not more than 10% of zinc stearate (cas rn 557-05-1)

Preparation containing by weight -60% or more but not more than 70% of calcium rel-(1r,2s)-cyclohexane-1.2-dicarboxylate (cas rn 491589-22-1), -30% or more but not more than 40% of zinc stearate (cas rn 557-05-1), -1% or more but not more than 5% of ci pigment blue 29 (cas rn 57455-37-5) and -1% or more but not more than 5% of ci pigment violet 15 (cas rn 12769-96-9)

Paraffin with a level of chlorination of 70% or more (cas rn 63449-39-8)

Preparation containing by weight 60% or more but not more than 70% of calcium rel-(1r,2s)-cyclohexane-1.2-dicarboxylate (cas rn 491589-22-1) and 30% or more but not more than 40% of zinc stearate (cas rn 557-05-1)

Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent

Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2.4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

Sodium hydrogen 3-aminonaphthalene-1.5-disulphonate (cas rn 4681-22-5) containing by weight: - not more than 20% of disodium sulphate, and - not more than 10% of sodium chloride

Nonhalogenated flame retardant containing by weight: -50% or more, but not more than 65% of piperazine pyrophosphate (cas rn 66034-17-1), -35% or more, but not more than 45% of a phosphoric acid derivative and -not more than 6% of zinc oxide (cas rn 1314-13-2)

Tris(hydroxymethyl)phosphine oxide (cas rn 1067-12-5) with a purity by weight of 85% or more

Zinc dimethacrylate (cas rn 13189-00-9), containing not more than 2.5% by weight of 2.6-di-tert-butyl-alpha-dimethyl amino-p-cresol (cas rn 88-27-7), in the form of powder

Mixture of phytosterols containing by weight: - 35% or more but not more than 88% sitosterols, - 20% or more but not more than 63% campesterols, - 14% or more but not more than 38% stigmasterols, - not more than 13% brassicasterols, - not more than 10% other stanols, and - not more than 10% other sterols

Disodium 7.7'-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulphonate) (cas rn 20324-87-2) with a purity by weight of 80% or more

Mixture of phytosterols, not in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters

Reaction mass of 1.1'-(isopropylidene)bis[3.5-dibromo-4-(2.3-dibromo-2-methylpropoxy)benzene] (cas rn 97416-84-7) and 1.3-dibromo-2-(2.3-dibromo-2-methylpropoxy)-5-{2-[3.5-dibromo-4-(2.3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene

Mixture of phytosterols, in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols for use in the manufacture of stanols/sterols or stanol/sterol esters

Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1.1'-oxybis(2-chloroethane)

1.3-propanediamine, n1,n1'-1.2-ethanediylbis-, reaction products with cyclohexane and peroxidised n-butyl-2.2,6.6-tetramethyl-4-piperidinamine-2.4,6-trichloro-1.3,5-triazine reaction products (cas rn 191680-81-6)

Mixture of phytosterols, in the form of flakes and balls, containing by weight 80% or more of sterols and not more than 4% of stanols

Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (hplc) and sample preparation cartridges

Mixture of phytosterols containing by weight: - 60% or more, but not more than 80% of sitosterols, - not more than 15% of campesterols, - not more than 5% of stigmasterols and - not more than 15% of betasitostanols

Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate

Other

Rare-earth concentrate containing by weight: - 20% or more but not more than 30% of cerium oxide (cas rn 1306-38-3), - 2% or more but not more than 10% of lanthanum oxide (cas rn 1312-81-8), - 10% or more but not more than 15% of yttrium oxide (cas rn 1314-36-9), and - not more than 65% of zirconium oxide (cas rn 1314-23-4) including natural occurring hafnium oxide

Calcined bauxite (refractory grade)

Structured silica alumina phosphate

Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: - on a support of mineral wax, whether or not modified chemically, or - in the form of a solution in an organic solvent

2-(ethylthio)ethanethiol functionalised silicagel with a purity by weight of 98% or more

Lithium nickel cobalt aluminium oxide powder (cas rn 177997-13-6) with: -a particle size of less than 10 μm, -a purity by weight of more than 98%

Manganese zinc ferrite granulate, containing by weight: - 52% or more but not more than 76% of iron(iii)oxide, - 13% or more but not more than 42% of manganese oxide, and - 2% or more but not more than 22% of zinc oxide

Mixed metals oxides, in the form of powder, containing by weight: - either 5% or more of barium, neodymium or magnesium and 15% or more of titanium, - or 30% or more of lead and 5% or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors

Zirconium oxide (zro2), calcium oxide stabilised (cas rn 68937-53-1) with a zirconium oxide content by weight of 92% or more but not more than 97%

Nickel hydroxide, doped with 12% or more but not more than 18% by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

Rare-earth concentrate containing by weight 60% or more but not more than 95% of rare-earth oxides and not more than 1% each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5% or more by weight

Carrier in powder form, consisting of: - ferrite (iron oxide) (cas rn 1309-37-1) - manganese oxide (cas rn 1344-43-0) - magnesium oxide (cas rn 1309-48-4) - styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers

Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (hplc) and sample preparation cartridges

Fused magnesia containing by weight 15% or more of dichromium trioxide

Viscous preparation essentially containing: -by weight more than 5% but not more than 15% of poly(vinyl alcohol) (cas rn 9002-89-5), -by weight more than 10% but not more than 20% of 1-methoxy-2-propanol (cas rn 107-98-2), -water, for use as a protective coating for wafers during the slicing process in the manufacture of semiconductors

Aluminium sodium silicate, in the form of spheres of a diameter of: - either 1.6mm or more but not more than 3.4mm, - or 4mm or more but not more than 6mm

Lithium nickel dioxide (cas rn 12325-84-7) containing by weight: -less than 5% of lithium hydroxide (cas rn 1310-65-2), -less than 5% of lithium carbonate (cas rn 554-13-2), and -less than 15% of nickel oxide (cas rn 11099-02-8)

Reaction product, containing by weight: - 1% or more but not more than 40% of molybdenum oxide, - 10% or more but not more than 50% of nickel oxide, - 30% or more but not more than 70% of tungsten oxide

Mixture with a non-stoichiometric composition: - with a crystalline structure, - with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75% by weight of which consists of fractions with a grain size of 1-3 mm and at most 25% consists of fractions with a grain size of 0-1 mm

Mixture consisting of: - 64% or more, but not more than 74% by weight of amorphous silica (cas rn 7631-86-9) - 25% or more, but not more than 35% by weight of butanone (cas rn 78-93-3) and - not more than 1% by weight of 3-(2.3-epoxypropoxy)propyltrimethoxysilane (cas rn 2530-83-8)

Cubic boron nitride (cas rn 10043-11-5) coated with nickel and/or nickelphosphide (cas rn 12035-64-2)

Platinum oxide (cas rn 12035-82-4) fixed on a porous support of aluminium oxide (cas rn 1344-28-1), containing by weight: - 0.1% or more but not more than 1% of platinum, and - 0.5% or more but not more than 5% of ethylaluminium dichloride (cas rn 563-43-9)

Monosodium glutamate in mixture or in solution, containing by dry weight 50% or more of monosodium glutamate

Mixture, in pellet form, containing by weight: - 49% or more but not more than 50% of bis[3-(triethoxysilyl)propyl] polysulphides (cas rn 211519-85-6), and - 50% or more but not more than 51% of carbon black (cas rn 1333-86-4), of which 75% by weight or more pass through a sieve with an aperture of 0.60 mm, but not more than 10% pass through a sieve with an aperture of 0.25 mm (as determined by the astm d1511 method)

Other