Exclusive webinar

The Traceability Gap: Managing Risk Across Suppliers Beyond Tier 1

HS Code Lookup for Chapter 73

HS Code Lookup helps classify products under appropriate HS code and find duties applicable across 140+ countries. Find and discover HS classification, tariffs, taxes, controls, rulings, ECCNs, and default and preferential duties for HS code 73.

Chapter 73

Articles of iron or steel

List of Headings & Description

7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel.

7302 Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails.

7303 Tubes, pipes and hollow profiles, of cast iron.

7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.

7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel.

7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.

7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel.

7308 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel.

7309 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.

7310 Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment.

7311 Containers for compressed or liquefied gas, of iron or steel.

7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated.

7313 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel.

7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel.

7315 Chain and parts thereof, of iron or steel.

7316 Anchors, grapnels and parts thereof, of iron or steel.

7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper.

7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel.

7319 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included.

7320 Springs and leaves for springs, of iron or steel.

7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel.

7322 Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel.

7323 Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel.

7324 Sanitary ware and parts thereof, of iron or steel.

7325 Other cast articles of iron or steel.

7326 Other articles of iron or steel.

WCO Notes for Chapter 73

Chapter 73

Articles of iron or steel

Notes.

1.‑ In this Chapter the expression “cast iron” applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.

2.‑ In this Chapter the word “wire” means hot or cold‑formed products of any cross‑sectional shape, of which no cross‑sectional dimension exceeds 16 mm.

GENERAL

This Chapter covers a certain number of specific articles in headings 73.01 to 73.24, and in headings 73.25 and 73.26 a group of articles not specified or included in Chapter 82 or 83 and not falling in other Chapters of the Nomenclature, of iron (including cast iron as defined in Note 1 to this Chapter) or steel.

For the purposes of this Chapter, the expressions “tubes and pipes” and “hollow profiles” have the following meanings hereby assigned to them :

(1) Tubes and pipes

Concentric hollow products, of uniform cross‑section with only one enclosed void along their whole length, having their inner and outer surfaces of the same form. Steel tubes are mainly of circular, oval, rectangular (including square) cross‑sections but in addition may include equilateral triangular and other regular convex polygonal cross‑sections. Products of cross‑section other than circular, with rounded corners along their whole length, and tubes with upset ends, are also to be considered as tubes. They may be polished, coated, bent (including coiled tubing), threaded and coupled or not, drilled, waisted, expanded, cone shaped or fitted with flanges, collars or rings.

(2) Hollow profiles

Hollow products not conforming to the above definition and mainly those not having their inner and outer surfaces of the same form.

The General Explanatory Note to Chapter 72 applies, mutatis mutandis, to this Chapter.

FAQs

What is HS code 73?

HS code 73 includes Articles of iron or steel.

How many headings are there in HS code 73?

There are 26 heading(s) in HS code 73.

What is an HS Code and Why Does it Hold For Cross-Border Trade?

HS code is a standardized six-digit numerical classification system developed by the World Customs Organization (WCO) and acts as a universal language for simplifying the process of identifying and classifying traded products. They ensure consistent customs clearance, enable accurate duty calculation, and help identify relevant trade regulations. This simplifies the process for businesses, saving time, reducing risk, and promoting informed decision-making.

What are Controls and Why should Businesses Focus on Them?

In global trade, controls refer to a set of regulations and policies implemented by governments to manage the import and export of goods and services. These controls can take various forms, including tariffs, quotas, embargoes, export controls, and licensing requirements. Companies should prioritize understanding and adhering to them for compliance, reduced risk of legal issues, mitigating reputational damage, staying competitive, and building trust with governments.

What are Tariffs in Global Trade and Why should Businesses Focus on Them?

In global trade, tariffs are a type of tax levied by a government on imported goods. They act as a financial barrier to entry, increasing the overall cost of the imported product for domestic consumers and businesses. By understanding how tariffs work and their potential impact, companies can make informed decisions about pricing, sourcing, and market expansion, ultimately ensuring their competitiveness in the global marketplace.

What are FTAs in Global Trade and Why should Businesses Focus on Them?

In global trade, Free Trade Agreements (FTAs) are legally binding agreements between two or more countries aimed at reducing or eliminating barriers to trade between them. By understanding the terms of relevant FTAs and strategically incorporating them into their business plans, companies can enjoy reduced costs, expanded market access, and a more competitive edge in international trade.