The Traceability Gap: Managing Risk Across Suppliers Beyond Tier 1
HS Code Lookup for Sub-Heading 870850 in Isle of Man
HS Code Lookup helps classify products under appropriate HS code and find duties applicable across 140+ countries. Find and discover HS classification, tariffs, taxes, controls, rulings, ECCNs, and default and preferential duties for HS code 870850.
Sub Heading 870850
Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof - Parts and accessories of the motor vehicles of headings 87.01 to 87.05. - Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
Select Country of Import to view its detailed HS
Select Country
Tariff Structure and Controls for HS Code 870850 in Isle of Man
HS Code & Description
8708502015
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
View Tariff & Duties
8708502018
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:
-two cardan rods,
-central universal joint,
-central bearing with suspension in a plastic cover,
-universal joints on both ends of the shaft,
-slip, tube and end yokes,
-of a length of 1.4 m or more but not more than 2.4 m,
for use in the production of goods of chapter 87
View Tariff & Duties
8708502020
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg
View Tariff & Duties
8708502025
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,
-forged, turned, milled and hardened
View Tariff & Duties
8708502035
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67.0 mm or more but not more than 99.0 mm,
-3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened
View Tariff & Duties
8708502045
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,
-forged, turned, milled, broached and hardened
View Tariff & Duties
8708502050
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708502055
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm,
-forged, turned, broached and hardened
View Tariff & Duties
8708502060
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution by chain
View Tariff & Duties
8708502065
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708502070
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67.0 mm or more but not more than 84.5 mm,
-3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm,
- sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
View Tariff & Duties
8708502075
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,
-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,
-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and
-with a grease compartment,
capable of working at constant speed at variable articulation angle not higher than 50 degrees
View Tariff & Duties
8708502090
Other
View Tariff & Duties
8708503500
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles
View Tariff & Duties
8708505520
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708505550
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburised with a carbon content of 0.14% or more but not more than 0.57%, forged, turned, punched, milled and hardened
View Tariff & Duties
8708505590
Other
View Tariff & Duties
8708509110
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708509190
Other
View Tariff & Duties
8708509910
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg
View Tariff & Duties
8708509915
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:
- at least an actuator,
- whether or not an interior distribution by chain
View Tariff & Duties
8708509920
Intermediate steel shaft connecting the gearbox with semi-axle with:
-a length of 300 mm or more but not more than 650 mm,
-a spline end on both sides,
-whether or not with a pressed bearing in the case,
-whether or not with a holder
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708509925
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67.0 mm or more but not more than 84.5 mm,
-3 cold calibrated roller tracks with a diameter of 29.90 mm or more but not more than 36.60 mm,
- sealing diameter 34.0 mm or more but not more than 41.0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25.0 mm or more but not more than 30.0 mm, with or without oil grooves
View Tariff & Duties
8708509935
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,
-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,
-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and
-with a grease compartment,
capable of working at constant speed at variable articulation angle not higher than 50 degrees
View Tariff & Duties
8708509940
Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (abs) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 87
View Tariff & Duties
8708509945
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,
-forged, turned, milled and hardened
View Tariff & Duties
8708509950
Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67.0 mm or more but not more than 99.0 mm,
-3 cold calibrated roller tracks with a diameter of 29.95 mm or more but not more than 49.2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened
View Tariff & Duties
8708509955
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:
-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,
-forged, turned, milled, broached and hardened
View Tariff & Duties
8708509960
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm,
-forged, turned, broached and hardened
View Tariff & Duties
8708509990
Other
View Tariff & Duties
Most classified products under HS 870850
- Complete Differential Assembly - A preassembled unit consisting of the differential gear mechanism.,
- Axle Shaft - The part of the axle that is connected to the wheels.,
- Differential Housing - The casing that encloses the differential gear set.,
- Crown Wheel and Pinion Set - A matched pair of gears that transmit power from the drive shaft to the axle shafts.,
- Differential Bearing Kit - A set of bearings used within the differential assembly. and
- Wheel Hub Assembly - The central component that houses the wheel bearings and provides
Tariffs and Duties for HS 8708502015
General MFN Duty
| Duty Name | Origin | Duty Rate | Duty Type | Unit of Measurement | |
|---|---|---|---|---|---|
| Default Duty | All Countries | Non preferential duty under authorised use||2.00% | Default Duty | - |
Accessing detailed Global Trade Compliance Content like Controls, Rulings, Tariffs, Duties etc requires a subscription to our platform.
VAT / GST Taxes
| Tax Type | Tax Rate | Duty Type | |
|---|---|---|---|
| General VAT rate |  | |
Accessing detailed Global Trade Compliance Content like Controls, Rulings, Tariffs, Duties etc requires a subscription to our platform.
Preferential Duty
| Preferential Program | Country of Export | Duty Rate | Duty Type | |
|---|---|---|---|---|
| Canada | | | |
| Ecuador | | | |
| Egypt | | | |
| Georgia | | | |
| Ghana | | | |
| Israel | | | |
| Côte d'Ivoire | | | |
| Japan | | | |
| Liechtenstein | | | |
| Melilla | | |
Accessing detailed Global Trade Compliance Content like Controls, Rulings, Tariffs, Duties etc requires a subscription to our platform.
Controls
| S.No. | Country of Import | Country of Export | Control Type | Controlling Authority | Scope of Control | Excluded Countries | |
|---|---|---|---|---|---|---|---|
| 1 | Isle of Man | Korea (the Democratic People's Republic of) | | | | | |
| 2 | Isle of Man | Iran (Islamic Republic of) | | | | | |
| 3 | Isle of Man | Belarus | | | | | |
| 4 | Isle of Man | Russian Federation | | | | | |
| 5 | Isle of Man | Libya | | | | | |
| 6 | Isle of Man | Syrian Arab Republic | | | | | |
| 7 | Isle of Man | Iraq | | | | | |
| 8 | Isle of Man | Iraq | | | | | |
| 9 | Isle of Man | Syrian Arab Republic | | | | | |
| 10 | Isle of Man | Libya | | | | |
Accessing detailed Global Trade Compliance Content like Controls, Rulings, Tariffs, Duties etc requires a subscription to our platform.
FAQs
What is HS code 870850?
HS code 870850 includes Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof - Parts and accessories of the motor vehicles of headings 87.01 to 87.05. - Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof.
What category is HS code 870850?
HS code 870850 belongs to chapter 87 Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof category.
What is the duty for HS code 8708502015 in Isle of Man?
The default duty for 8708502015 in Isle of Man is Non preferential duty under authorised use||2.00%. Find duties for other HS codes in Isle of Man.
Does HS code 8708502015 have free trade agreements in Isle of Man?
Yes, HS code 8708502015 has free trade agreements in Isle of Man such as UK-Canada Trade Continuity Agreement and more.
Does HS code 8708502015 have controls in Isle of Man?
Yes, HS code 8708502015 has controls in Isle of Man such as Import Permit and more.
How many dutiables are there in HS code 870850 in Isle of Man?
There are 30 dutiables in HS code 870850.
What is an HS Code and Why Does it Hold For Cross-Border Trade?
HS code is a standardized six-digit numerical classification system developed by the World Customs Organization (WCO) and acts as a universal language for simplifying the process of identifying and classifying traded products. They ensure consistent customs clearance, enable accurate duty calculation, and help identify relevant trade regulations. This simplifies the process for businesses, saving time, reducing risk, and promoting informed decision-making.
What are Controls and Why should Businesses Focus on Them?
In global trade, controls refer to a set of regulations and policies implemented by governments to manage the import and export of goods and services. These controls can take various forms, including tariffs, quotas, embargoes, export controls, and licensing requirements. Companies should prioritize understanding and adhering to them for compliance, reduced risk of legal issues, mitigating reputational damage, staying competitive, and building trust with governments.
What are Tariffs in Global Trade and Why should Businesses Focus on Them?
In global trade, tariffs are a type of tax levied by a government on imported goods. They act as a financial barrier to entry, increasing the overall cost of the imported product for domestic consumers and businesses. By understanding how tariffs work and their potential impact, companies can make informed decisions about pricing, sourcing, and market expansion, ultimately ensuring their competitiveness in the global marketplace.
What are FTAs in Global Trade and Why should Businesses Focus on Them?
In global trade, Free Trade Agreements (FTAs) are legally binding agreements between two or more countries aimed at reducing or eliminating barriers to trade between them. By understanding the terms of relevant FTAs and strategically incorporating them into their business plans, companies can enjoy reduced costs, expanded market access, and a more competitive edge in international trade.
International Trade Compliance Simplified
140+
Countries Covered
440+
Government Authorities
300+
FTAs Monitored
500K+
Customs Rulings
880K+
Import & Export Compliance Data Entities
APIs
Data License
Plans
Directories
Company
Location
United States
3000 El Camino Real, Building 4, Suite 200, Palo Alto, California 94306
India
2nd Floor, Plot No. 136, Sector 44, Gurugram, Haryana 122003
All rights reserved | Terms of use Copyright ©2025 Trademo Technologies Inc.